Silicon carbide rod clamp conductive strip connecting wire

The connecting wires between silicon carbon rods and the power supply include three types of conductive bands: aluminum foil tape, aluminum foil strip, and copper braided strip. When connecting, wrap the conductive band around the white cold end of the silicon carbon rod, and then secure it with a clip. Clips include ordinary spring clips, G-type screw-fixed clips, and C-type clips, available in two materials: galvanized clips and stainless steel clips. The outer clip only serves a clamping function and is not used for conducting electricity. To avoid transmitting stress to the silicon carbon rod, the length of the wire should be slightly greater than the straight-line distance between the component and the busbar. Silicon carbon rod clamps and conductive bands with diameters ranging from 12-90mm can be provided. Silicon carbon rod clamps and conductive bands are not interchangeable and must match the diameter of the silicon carbon rod. Commonly used specifications of silicon carbon rod clamps and conductive bands are available as ready-made products and can be shipped on the same day.